The temperature is controlled through the connection of digital display instruments and temperature sensors. The hot air circulation air supply method is adopted, and the hot air circulation system is divided into horizontal type and vertical type. All calculations have been made. The air source is driven by the operation of the air supply motor, which drives the fan to pass through the electric heater. The hot air is sent to the air duct and then enters the oven working chamber. The used air is also drawn into the air duct to become the air source for another cycle of heating and reuse. This can effectively improve the temperature uniformity. If the box door is opened or closed during use, the air circulation system can be used to quickly restore the operating temperature value.
The structure of wanchen 3 in 1 sandwich maker supply
The wanchen 3 in 1 sandwich maker supply has an inner and outer double-layer structure. The shell is made of thin Angle steel plate, and fibrous substances are filled between the inner and outer double-layer shells. The fiber material used in wanchen 3 in 1 sandwich maker supply is mostly aluminium silicate, which can play an insulating role and form a reliable insulation layer. The wanchen 3 in 1 sandwich maker supply is equipped with a hot air circulation system and a temperature measurement and control system.
2. The principle of wanchen 3 in 1 sandwich maker supply
When the wanchen 3 in 1 sandwich maker supply is in operation, the operator obtains the internal temperature value of the wanchen 3 in 1 sandwich maker supply through the instrument and the temperature sensor, and then operates it through the control system. The hot air circulation heating method of wanchen 3 in 1 sandwich maker supply, compared with the ordinary heat dissipation heating method, has better gas fluidity and can accelerate the drying speed of the materials in wanchen 3 in 1 sandwich maker supply.
The wanchen 3 in 1 sandwich maker supply hot air circulation system is composed of an air supply motor, a wind turbine and an electric heater. The wind drives the motor to emit cold air. After the cold air is electrically heated, it enters the oven workshop and transfers heat energy through the electric heating equipment.
The hot air circulation system of wanchen 3 in 1 sandwich maker supply is conducive to improving the uniformity of air temperature. During the process of transporting materials by the wanchen 3 in 1 sandwich maker supply door, the temperature value will be affected and change. The uniformity of the hot air circulation system is conducive to restoring the working state's temperature value at the fastest speed.
Daily maintenance of wanchen 3 in 1 sandwich maker supply
Clean the dust on the surface and inside the cavity to keep the machine clean and hygienic.
2. Check whether the current on the ammeter is the same as the normal current. If there are any differences, notify the maintenance personnel for maintenance.
3. In case of a sudden power outage, the heating switch should be turned off to prevent automatic startup when power is restored.
4. Check if the blower is functioning properly and if there are any abnormal sounds. If so, immediately turn off the machine and notify the maintenance personnel for inspection.
Monthly maintenance of wanchen 3 in 1 sandwich maker supply
Check if the ventilation openings are blocked and remove the dust.
2. Whether the blower is working properly.
3. Maintenance personnel check whether the current is normal.
4. Check whether the thermostat is accurate. If not, please adjust the static compensation of the thermostat or the sensor calibration value.
5. Check whether the heating tubes are damaged and whether the circuits are aged.
6. Check whether the delay device is accurate and whether the error is allowed.
7. For more precautions, please communicate with Saimai Industrial Equipment.
wanchen 3 in 1 sandwich maker supply https://www.nbwanchen.com/SANDWICH-MAKER
